Find Cold Applied Inner Wrap Tape, Cold Applied Inner Tape, POLYKEN Cold Applied Wrap Tape on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Polyken Pipe Coating System > Polyken 980 (Inner Wrap) > POLYKEN980 Cold Applied Inner Wrap Tape

POLYKEN980 Cold Applied Inner Wrap Tape

Basic Info

Model No.: Polyken980

Product Description

Description

The temperature of the Polyken Cold Applied Wrap Tape rewinding must be above 5 degrees C, and the

construction of the anticorrosion layer should be carried out above -5 C. (experience shows that the wrap

can be carried out at a lower temperature of -30 C, but to ensure the temperature of the deconvolution.)

When the ambient temperature is below 10 DEG C, in order to ensure the instant adhesive tape has good

bond strength, should adopt the torch tube and baking adhesive surface heating tape.For the weld, if

necessary, should be strengthened with a narrow strip of 30-50 millimeter width, first covered in the weld

and compacted with a hand or a wooden slippery tool.Polyken Cold Applied Wrap Tape including Inner Wrap

Tape, Outer Wrap Tape,Joint Wrap Tape.


Properties

Product Properties

Test method

Typical Value

POLYKEN980-15

POLYKEN980-20

POLYKEN980-25

POLYKEN980-30

Total Thickness

15mil(0.381mm)

20mil(0.508mm)

25mil(0.635mm)

30mil(0.762mm)

Backing of PE film

9 mils(0.229 mm)

12mil(0.305mm)

13mil(0.330mm)

10mil(0.254mm)

Butyl Rubber Adhesive

6 mils(0.152 mm)

8mil(0.203mm)

12mil(0.305mm)

20mil(0.508mm)

Tensile Strength

ASTM D1000

40 N/cm

55 N/cm

62 N/cm

70 N/cm

Elongation

ASTM D1000

300%

330%

350%

400%

Peel Adhesion to Primed Steel

ASTM D1000

24.5 N/cm

25 N/cm

26.5 N/cm

30 N/cm

Water Vapor Transmission Rate

ASTM E 96

0.10g/m2

0.10g/m2

0.09g/m2

0.08g/m2

Water absorption after 1 day,At+23

ASTM D570

0.10%

0.10%

0. 08%

0. 06%

Volume Resistivity

ASTM D 257

2.0 x 1015 ohm.cm

2.5 x 1015 ohm.cm

2.5 x 1015 ohm.cm

2.5 x 1015 ohm.cm

Dielectric Strength

ASTM D149

30 kV

35 kV

42kv

43kv

Backing : Special blend of stabilized polyethylene

Adhesive : Butyl rubber and Adhesion Promoting Resins

Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)

Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)

Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)

 Polyken Cold Applied Wrap Tape

production Image

Polyken980 tape

Other Production Recommendation

Polyken955 Outer Tape,PolykenPetrolatum Tape, Polyken Aluminum Butyl Tape

gas pipe coating tape

mechanical tape

anticorrosion tape

cold applied tape

polyethylene wrap tape


Contact us if you need more details on Cold Applied Inner Wrap Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cold Applied Inner Tape、POLYKEN Cold Applied Wrap Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Polyken Pipe Coating System > Polyken 980 (Inner Wrap)